M15－M60 Methanol Gasoline Additive

What is methanol gasoline?

Methanol gasoline is composed of gasoline, methanol and relative additive. Core technology of methanol gasoline is the technical level and quality control of additive. Quality of methanol gasoline is directly decided by the technical level of methanol gasoline additive, that to say selection of better additive is of the utmost importance.　　

About M15－M60 methanol gasoline additive:

Tiande brand M15—M60 methanol gasoline additive is a new type of alcohol-based additive in national patent number ZL 97 1 22155 3, which is strictly developed and prepared by certain production technologies. First step is to make denatured methanol: put certain amount of Tiande brand additive into methanol (methanol shall meet standards of GB338-2004), and then mix it with regular gasoline in accordance with required ratio to get finished product—vehicle fuel. We can prepare M15, M20, M30, M50 and M60 according to requirements of customers. By using these fuels there is no need of car modification and they can be directly used instead of gasoline, which have the same burning qualities as that of national standard gasoline.

Physical-chemical properties of Tiande brand M15—M60 methanol gasoline additive:

Features of Tiande brand M15—M60 methanol gasoline additive:

1) Unique co-solvent technique: By using Tiande additive, alcohols can be soluble in oils such national standard gasoline, ethanol gasoline, direct distilled gasoline, anphtha, light oil without phase separation and emulsification, which has great stability.

2) Good water resistance performance: It can guard against moisture in air during preparation, transportation, storage and injection which are good for its production and use.

3) Adaptation of ambient environment: It can be prepared and used under temperature of -40℃--40℃, and there is no phase separation in cold temperature. Vehicle starts easily and there is air lock in high temperature.　

4) Excellent heat value improvement technology: Through denaturing methanol to improve its heat value and at the same time to enhance combustion efficiency and heat value by taking advantage of methanol’s characteristic of latent heat of evaporation. It can improve engine’s dynamics and lower vehicle’s fuel consumption which enables this kind of fuel to have the same power as that of national standard gasoline.

5) Infinitely solubility, anti-corrosion & swelling: Finished product of methanol gasoline is infinitely soluble in national standard gasoline, ethanol gasoline and non-standard gasoline without car modification or no need of adding any other equipment. It can be burnt directly without corrode and swell any part of engine.

6) Large proportion alternative, small proportion emission, energy-saving and environment-protection: We can mix denatured methanol in large proportion into national standard gasoline. During the burning process, through the agency of ignition accelerator, it inhibits the produce and emission of methanol gas from unburned methanol when you cold start the engine. Poisonous content such as sulphur, benzol and arene lowers up to 20%--70%. Poisonous gas such as CO, HC, and NO in exhaust gas emission reduces 40%--95%.

Preparation method of methanol gasoline: 

1) Preparation procedure:

　* Put 2% of Tiande brand methanol gasoline additive into 98% of methanol. After evenly blending, we can get denatured methanol.
　* Take 15%, 20% and 30% of denatured methanol respectively into 85%, 80% and 70% of national standard gasoline. After evenly blending, we can get the finished product: M15, M20 and M30.
　* Preparation method of M50 and M60 is the same as aforesaid, but the amount of additive shall increase from 2% to 5%.　

2) Notes: More details please refer to “methanol gasoline”