Methanol-gasoline Blended Fuel Additive
Introduction of methanol-gasoline blended fuel:
1) Methanol-gasoline blended fuel is composed of base gasoline, methanol and the relative additive/surfactant. The key of methanol-gasoline blended fuel technology is technological level and quality control of the additive. The soul content that determines a good methanol-gasoline product preparation is the technical level of the additive.
2) Since the coming out of "Tiande" brand methanol-gasoline blended fuel additive by 2003, it always obtains consistent high praise from customers through its practice over the past ten years, and it was honored with the title "Quality Product" by Bureau of Quality Supervision of Henan Province.
Definition of Methanol-gasoline Blended Fuel Additive:
Our additive is the auxiliary agents for mixing methanol with gasoline equably. It is quite essential during the process of making methanol gasoline. And with it, you could improve the octane value, calorific value and power of fuel easily.
Features of "Tiande" Brand Additive:
1) Unique solubilization technology to enhance stability of finished product: It can have alcohol and oil organically compatible without layers and emulsifications, which is soluble with national standard gasoline and ethanol-gasoline blended fuel infinitely.
2) Super water resistance: It can resist moisture in the air during transportation, storage and filling-up.
3) Good anti-corrosion performance: Through strong interactions between alkaline group in corrosion inhibitor molecules and metal surface, it can make chemical and physical adsorption to occur to form a good protective film which can insulate the contact between methanol and metal parts to some extent, so that it can reach the corrosion reduction or inhibition aims.
4) Super adaptability of temperature environment: It can be normally produced or used under temperature from -40℃ to 40℃. It resists phase separation under low temperature, and also easy to start under low temperature and no air lock under high temperature.
5) Special technology of heat value improvement: It increases heat value by using denatured methanol, and at the same time, promotes the overall improvement of burning rate and thermal efficiency because of one of methanol’s features like high vaporization latent heat which enable it to have the same combustion effect as national standard gasoline does. It means power enhancement and fuel consumption reduction.
Application of Methanol-gasoline Blended Fuel Additive:
1. You could mix gasoline with denatured methanol (methanol with relevant additives) at any proportion, such as 90% gasoline vs. 10% denatured methanol.
2. Pls first mix additive with methanol first and then mix the denatured methanol with standard gasoline.
Examples of final methanol gasoline:
Model
|
Quantity(kg)
|
Proportions
|
Methanol
|
Additives
|
Denatured methanol
|
Gasoline
|
Methanol
|
Additives
|
Gasoline
|
M15
|
147
|
3
|
150
|
850
|
14.7%
|
0.3%
|
85%
|
M30
|
294
|
6
|
300
|
700
|
29.4%
|
0.6%
|
7%
|
M60
|
588
|
12
|
600
|
400
|
58.8%
|
1.2%
|
40%
|
M85
|
833
|
17
|
850
|
150
|
83.3%
|
1.7%
|
15%
|
|