No. 2 Gasoline
Introduction of No.2 gasoline:
1) Integrating with certain technology, Tiande Brand No. 2 gasoline is prepared by mixture and reaction between alcohol-based fuel and additive (surfactant).
2) Tiande Brand No. 2 gasoline solves the problems of emulsification and whitening which are caused by traditional methanol gasoline fuel meeting water.
3) If No. 2 gasoline meets water, no matter in rest or motion state, oil layer and water layer are both clear and transparent.
4) This product can be soluble with gasoline infinitely which can be used instead of gasoline.
5) The proportion of this product in gasoline can be 50% in volume, whose indexes are the same as that of national standard gasoline.
Product Features:
1. Appearance of Tiande Brand No. 2 gasoline is clear and transparent in light yellow color, no smell. Important indexes such as cetane number, distillation range and sulfur content of this product are all met the standard of gasoline.
2. Tiande Brand No. 2 gasoline can be soluble with national standard gasoline, ethanol gasoline fuel, light oil and naphtha infinitely with no phase separation, no emulsification and no bleaching even stored for one year.
3. This product is separated from water in rest or motion state without emulsifications whose property is the same as that of national standard gasoline.
4. Tiande Brand No. 2 gasoline has better cetane number and fine antiknock property. It has sufficient power to ensure engine runs smoothly, burns completely, reduces fuel consumption and has fewer residual carbons.
5. It can be normally operated and used under temperature ranging from -40℃ to 40℃. It has no phase separation under low temperature so it can be added in national standard gasoline in great proportion (ranging from 15% to 50%). Due to alcohol ether fuel’s property of good evaporation and combustibility, it restrains cold start problem of engine under low temperature
Technical data of No.2 gasoline:
|
Appearance and odor |
clear and transparent liquid in light yellow color, no smell |
|
Cetane number |
93 |
|
Density (20℃, g/cm3) |
0.75—0.785 |
|
Sulfur content |
＜10 |
|
Distillation range (initial boiling point)
10% evaporation temperature/℃
50% evaporation temperature/℃
90% evaporation temperature/℃
Final distillation temperature/℃
|
38
43
55
110
183
|
|
QMA/% (volume fraction) |
0.5 |
|
Copper corrosion（0℃·h) |
1a |
|
Moisture content: (V/V) |
＜0.005 |
|
Mechanical impurities and moisture content |
none |
Product economic benefits analysis:
Cost per ton of Tiande Brand No. 2 gasoline is RMB6300.00, and cost of national standard gasoline is RMB9000.00 or so. If the proportion of this product in gasoline is 50%, profit per ton will be RMB1350.00. Specific proportion of this product in gasoline is free to go on customer's way. It has high utilization and good economic benefits which means its promising and extensive market.
Due to logistics cost problems for remote customers, we particularly consider technology transfer of this product, or we can coproduce with you in the locality. More details please refer to "Join Us"
|
