Methanol-gasoline Blended Fuel

Introduction of methanol-gasoline blended fuel:

Methanol-gasoline blended fuel is a new kind of environment-friendly fuel, which is a kind of methanol fuel: first add a compound additive in methanol to make it denatured methanol, and then mix it in gasoline at certain ratio to make it being fuel for motor powered vehicle. It is a kind of methanol blends fuel whose burning rate, heating value of gasification, intersolubility and explosive acceleration are close to the traditional gasoline fuel. It can be used directly without any modification of motor engines or devices.

Features of methanol-gasoline blended fuel:

1. High Quality Assurance:
Since the coming out of "Tiande" brand methanol-gasoline blended fuel additive by 2003, it always obtains consistent high praise from customers through its practice over the past ten years, and it was honored with the title "Quality Product" by Bureau of Quality Supervision of Henan Province.

2. Four Usages of One Additive:
1) First add 2% additive in methanol, and the mixture is soluble in national standard gasoline infinitely.
2) Add 2% additive in methanol, and the mixture is soluble with ethanol-gasoline blended fuel infinitely (Operation method is the same as what you mix them with pure gasoline, but you should reduce 10% of the denaturant in volume).
3) After adding 2% additive in methanol, you can mix them with naphtha first, then make it blended with national standard gasoline and ethanol.
4) Just add additive in the mixture of methanol and naphtha, then it has the equal power effect as #90 gasolines does. It can be used in motor vehicles and there is no need to be mixed with gasoline.

3. Good Quality and Economy:
If you make 700kg gasoline and 300kg methanol mixed to get 1000kg methanol-gasoline blended fuel, you just need 6kg "Tiande" brand additive added, which is only 6% in the total volume. In other words, you can get 1000kg methanol-gasoline blended fuel with additive cost 14 USD only.　

4. Limpidity and Transparency
The methanol-gasoline blended fuel by using our "Tiande" brand additive/surfactant is clear and transparent. Our additive can be soluble in any gasoline infinitely, especially with engine oil. If it is exposed to the sun and air in a short time, it gets no emulsification. If you touch methanol-gasoline blended fuel, it feels just the same as the gasoline and your skin can not turn white.

5. Easy Operation:
One who knows little about chemistry can easily learn how to manipulate the whole procedure within ten minutes, for example: add 2kg additive in 100kg methanol and mix them evenly, then they become denatured methanol. Finally, you can mix it with gasoline by proportion according to the actual needs. 

6. Random Preparation:
If additive in methanol is no less than 2% in volume, it can be solved no matter what the problem is. For example, if there exists layers, add a little more additive; and if there is too much water and it would cost you much by adding more additive, you can solve the problem by using water removal agent for oil tanks researched by our company (dehydrating agent). In brief, no matter how and what you prepare, you always can get standard methanol-gasoline blended fuel you want.
 
Specifications of Preparation:
1)  Mixing methanol in national standard gasoline: First, add 2% (weight or volume ratio) "Tiande" brand additive in 98% of methanol in volume to make them being denatured methanol; then mix the denaturant (from 20% to 60%) in 90# or 93# gasoline, finally mix and blend them well to transparent and pure methanol-gasoline blended fuel. NOTICE: Make laboratory experiments with samples firstly, then start the mass preparation only if experimental findings seems pure and transparent and there is no layers.
A)  Add 15% denaturant in 85% 90# or 93# gasoline (weight or volume ratio) and evenly mix to get M15 (93#) methanol-gasoline blended fuel;
B)  Add 20% denaturant in 80% 90# or 93# gasoline (weight or volume ratio) and evenly mix to get M20 (95#) methanol-gasoline blended fuel;
C)  Add 30% denaturant in 70% 90# or 93# gasoline (weight or volume ratio) and evenly mix to get M30 (97#) methanol-gasoline blended fuel;

2)  Mixing methanol in ethanol-gasoline blended fuel: First, add 2%-3% (weight or volume ratio) "Tiande" brand additive in methanol to make them being denatured methanol; then mix the denaturant in ethanol (each formula reduces 10% dosage of the denaturant compared with mixing in gasoline). NOTICE: Make laboratory experiments with samples firstly, and then start the mass preparation only if experimental findings seems pure and transparent and there is no layers;

3)  Mixing methanol in gasoline that contains naphtha: mix and blend "Tiande" brand additive, methanol, naphtha and gasoline in weight or volume ratio 2:19:19:60 to get 93# gasoline. NOTICE: Make laboratory experiments with samples firstly, then start the mass preparation only if experimental findings seems pure and transparent and there is no layers;

4)  Mixing naphtha in methanol without using gasoline: add 8% "Tiande" brand additive in 46% methanol (by weight or volume) to make them being denatured methanol, then mix and blend them in 46% of naphtha in volume or weight evenly. NOTICE: Make laboratory experiments with samples firstly, then start the mass preparation only if experimental findings seems pure and transparent and there is no layers.
　　
Cautions of Preparation
1) Gasoline prepared shall be national standard unleaded gasoline and methanol shall be national standard A class product with purity over99.5%.
2) Fire prevention and protection;
3) Good ventilation and ambient temperature shall not exceed 30℃.
4) The procedure of blending shall be conducted in oil tanks or tank trucks in accordance with requirements of safety regulations. In addition, there shall be no bottom water or impurities like rust.
5) Additive shall be blended or mixed evenly with methanol firstly (after evenly blending, it is called denatured methanol), and then can be mixed in gasoline.
6) During the procedure of preparation, if accidentally splashed into the eyes or on the skin, rinse with water immediately. If seriously, one shall call for medical treatment immediately.
7) Storage facilities shall be sealed to avoid moisture outside (including the one in the air).

Products Advantages and Features:
1. Color is the same as gasoline is: transparent and clear;
2. Reliability of water resistance;
3. Good stability: there no layers for the finished products even it is stored a long time;
4. Good solubility: fuels with additive blended can be mixed in gasoline in any percentage;
5. Environment friendly: it can reduce vehicle exhaust emissions 30-70%.